Summer Starts Here - Save up to 70%
Trailer Wiring Harness Installation - 2005 Dodge Caravan- Video
Today on this 2005 Dodge Caravan, we're going to be installing Tow Ready Wiring Harness product number 118300. Ok, the port where we're going to plug our wiring harness into are located behind the rear tail lights on both the drivers and passenger's sides of the vehicle, so we want to go ahead and first remove both the tail lights. And to do that, we've opened up the rear cargo door here and you can see we've got two push pin fasters on the in-board side holding the tail light in place. We're going to go ahead and remove those. We can use a rivet removal tool, a flathead screwdriver or whatever you have available to you. With those removed, you can just go ahead and pull the tail light off and we see here on the back side, we got the connector for the wiring harness. more
1/26/2012 4:02:43 PM
Trailer Wiring Harness Installation - 2003 Dodge Caravan- Video
Today at Etrailer.com on this 2003 Dodge Caravan we are going to be installing part number 118376 from Tow Ready. The first thing we are going to do is gain access to our trunk. We are going to need to remove the fascia here and remove a couple of clips so we are able to pull back our panel a little bit to gain access to our wiring harness. We are going to start removing our bumper fascia. We are going to use a rivet tool remover and just popping them up. It is a pretty simple task. If you do not have rivet tool remover you can just take a flat head screwdriver and slide it under and just pry up. That will also work as well. We are just going to take this and set it aside. Then we are going to take the rivet tool remover and start unclipping a couple of clips from here. 00:49 more
6/30/2010 2:54:22 PM
Filter Videos
Filter Videos
